Yingjun Wang is an Associate Professor from School of Mechanical& Automotive Engineering, South China University of Technology, Guangzhou, China. He received his Ph.D. from Huazhong University of Science and Technology in 2013. After then, he worked in University of California, San Diego and McGill University as a Postdoctoral Fellow. After then, he joined South China University of Technology as an Associate Professor. His research interests include topology optimization, is geometric analysis, and CAD/CAE integration. In recent years, his research focuses on the integration of design, analysis and optimization based on is geometric topology optimization, supported by the National Natural Science Foundation of China and the National Key Research and Development Program of China. He is an Associate Editor of two international journals: CMES-Computer Modeling in Engineering & Science, and IET Collaborative Intelligent Manufacturing. He has published more than 40 international journal papers with more than 1000 citations. Besides, He won the 2020 CMES Young Researcher Award for his outstanding research in computer modeling and simulation.

Ephraim Suhir is on the faculty of the Portland State University, Portland, OR, USA. He is also CEO of a Small Business Innovative Research (SBIR) ERS Co. in Los Altos, CA, USA, is Foreign Full Member (Academician) of the National Academy of Engineering, Ukraine (he was born in that country); Life Fellow of the Institute of Electrical and Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME), the Society of Optical Engineers (SPIE), and the International Microelectronics and Packaging Society (IMAPS); Fellow of the American Physical Society (APS), the Institute of Physics (IoP), UK, and the Society of Plastics Engineers (SPE); and Associate Fellow of the American Institute of Aeronautics and Astronautics (AIAA). Ephraim has authored about 500 publications (patents, technical papers, book chapters, books), presented numerous keynote and invited talks worldwide, and received many professional awards, including 1996 Bell Laboratories Distinguished Member of Technical Staff (DMTS) Award (for developing effective methods for predicting the reliability of complex structures used in AT&T and Lucent Technologies products), and 2004 ASME Worcester Read Warner Medal (for outstanding contributions to the permanent literature of engineering and laying the foundation of a new discipline “Structural Analysis of Electronic Systems”). Ephraim is the third “Russian American”, after S. Timoshenko and I. Sikorsky, who received this prestigious award. His most recent awards are 2019 IEEE Electronic Packaging Society (EPS) Field award for seminal contributions to mechanical reliability engineering and modeling of electronic and photonic packages and systems and 2019 Int. Microelectronic Packaging Society’s (IMAPS) Lifetime Achievement award for making exceptional, visible, and sustained impact on the microelectronics packaging industry and technology.

Currently a fellow of ASME, ASCE, EMI and HKIE, Ir Professor Lim received a B.Eng. from University of Technology of Malaysia, M.Eng. and PhD from National University of Singapore and Nanyang Technological University, respectively. Prior to joining City University of Hong Kong, he was a post-doctoral research fellow at The University of Queensland and The University of Hong Kong. He is also a visiting professor at various universities worldwide. He has expertise in theory of plates and shells, dynamics of smart piezoelectric structures, nanomechanics, metamaterials and symplectic elasticity. He is currently the subject editor for Journal of Sound and Vibration, joint-editor for Journal of Mechanics of Material and Structures, subject editor for Applied Mathematical Modelling, Managing Editor (Asia-Pacific Region) for Journal of Vibration Engineering & Technologies, Associate Editor for International Journal of Bifurcation and Chaos, etc. and also on the editorial board of some other top-ranked international journals. He has published one very well-selling title entitled “Symplectic Elasticity”, co-authored with W.A. Yao and W.X. Zhong from Dalian University of Technology, as recorded by the publisher, World Scientific, in Engineering Mechanics and Mechanical Engineering. He has published more than 350 international journal papers and have more than 13,000 citations. Recently Professor Lim was awarded the prestigious 2020 JN Reddy Medal as a recognition “for significant and original contributions to vibration of plates and shells, smart piezoelectric structures, nanomechanics, and symplectic elasticity”. He will deliver a plenary lecture and chair another plenary lecture at WCCM-APACM 2022, the largest biennial meet for computational scientists worldwide. In another scientific forum of four speakers organized by Chinese Science Bulletin and broadcasted on five online platforms, Professor Lim presented the opening lecture and the forum attracted accumulatively over 30,000 audience. He was also previously awarded Top Referees in 2009, Proceedings A, The Royal Society. Professor Lim is a registered professional engineer in Hong Kong.

Will be updated soon.

Jung-Chang Wang (J.-C. Wang) is a full Professor and Dean in the School of Marine Engineering (D.M.E.), National Taiwan Ocean University (NTOU), Keelung, Taiwan, and is also the Director of the Thermal-Fluid Illumination Laboratory. He received his Bachelor and Master degrees from National Cheng Kung University (NCKU) and Mechanical PhD from National Taiwan University (NTU) in Taiwan in 2007. He has been teaching and researching on electronic heat transfer and renewable energy for more than ten years. He has published more than 100 research papers in international journals, conferences and patents, and edited seven book chapters. His main research interest includes applied and software engineering in thermal-fluid science.

Raul Duarte Salgueiral Gomes Campilho. Completed the Title of Aggregate in Habilitation in Mechanical Engineering in 2020/09/11 by Universidade do Porto Faculdade de Engenharia, Doutoramento in Ph.D. in Mechanical Engineering in 2009/06/25 by Universidade do Porto Faculty of Engineering, Master in M.Sc. in Mechanical Engineering - Profile of Mechanical Constructions in 2006 by Universidade do Porto Faculdade de Engenharia and Licenciatura in Graduation in Mechanical Engineering - Transport Branch in 2003 by Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto. Is Adjunct Teacher in Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Researcher in Associated Laboratory for Energy Transports and Aeronautics and Deputy Director of the Master in Mechanical Engineering in Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto. Published 280 articles in journals. It has 27 section(s) of books and 9 book(s). Participated in 90 event(s). Supervised 5 PhD thesis(es) and co-supervised 1. Supervised 142 MSc dissertation(s) and co-supervised 73. Has received 16 awards and/or honors. He participates and / or participated as Principal investigator in 1 project (s) and Researcher in 6 project (s). He works in the area(s) of Engineering and Technology with emphasis on Mechanical Engineering, Engineering and Technology with emphasis on Mechanical Engineering, Engineering and Technology with emphasis on Mechanical Engineering and Engineering and Technology with emphasis on Mechanical Engineering. In his curriculum Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: Madeira; Structures; Repair; Artificial composites; Adhesive joint; Structural adhesive; Design of bonded joints; Experimental testing; Finite Element Method; Extended Finite Element Method; Meshless methods; Cohesive Zone Models; Composite materials; Numerical modeling of composite materials; Micromechanics; Macromechanics; Design of mechanical structures; Flexible production; Automation; Robotics; Actuator systems.

Full professor at the Faculty of Transport and Electrical Engineering of the Kazimierz Pulaski University of Technology and Humanities in Radom (to 2022). Head of doctoral studies (to 2021). He has promoted 30 PhD students. Author of 350 scientific publications in Polish, English, German and Russian, including 28 scientific and design studies. His scientific interests include dynamics of mechanical systems in transportation, theory of stochastic processes, theory of sensitivity, problems of diagnostics and reliability of mechanical and electronic systems. He was a member of the Transport Committee of the Polish Academy of Sciences, is a member of the New York Academy of Sciences. During his work at the university he actively participated in economic life for 30 years holding managerial positions in public administration and managing medium and large economic entities.

Professor Sabu Thomas is currently Vice Chancellor of Mahatma Gandhi University, Kottayam, Kerala, india. Prof. Thomas is an outstanding leader with sustained international acclaims for his work in Nanoscience, Polymer Science and Engineering, Polymer Nanocomposites, Elastomers, Polymer Blends, Interpenetrating Polymer Networks, Polymer Membranes, Green Composites and Nanocomposites, Nanomedicine and Green Nanotechnology. In collaboration with India’s premier tyre company, Apollo Tyres, Professor Thomas’s group invented new high performance barrier rubber nanocomposite membranes for inner tubes and inner liners for tyres. Professor Thomas has received more than 30 national and international awards which include, FRSC, Distinguished Professorship from Josef Stefan Institute, Slovenia, MRSI medal,CRSI medal, Distinguished Faculty Award, Dr. APJ Abdul Kalam Award for Scientific Excellence – 2016,Mahatma Gandhi University- Award for Outstanding Contribution –Nov. 2016, Lifetime Achievement Award of the Malaysian Polymer Group, Sukumar Maithy Award Faculty Research Award, Trila – Academician of The Year, European Academy of Sciences He is in the list of most productive researchers in India and holds a position of No.5. Prof. Thomas has been conferred Honoris Causa (D.Sc) by the University of South Brittany, Lorient, France, Siberian Federal University, Russia and University of Lorraine, Nancy, France, awarded Senior Fulbright Fellowship, National Education Leadership Award – 2017 for Excellence in Education. Prof Thomas also won 6th contest of "mega-grants" - Russian Federation. Very recently, Prof, Thomas received the coveted Kairali award from Govt of Kerala. He also received the Chancellors Trophy for the best University of the state from the Chancellor. Very recently Prof. thomas has been ranked by Stanford university under 2 percent top leading researchers in the world. Professor Thomas has published over 1200 peer reviewed research papers, reviews and book chapters. He has co-edited 165 books inventor of 16 patents. The H index of Prof. Thomas is 122 and has more than 72,000 citations. Prof. Thomas has delivered over 350 Plenary/Inaugural and Invited lectures in national/international meetings over 30 countries. Prof. Thomas has supervised 115 PhD programme and his students occupy leading positions in academia and industry in India and abroad. 175 words Professor Sabu Thomas is currently Vice Chancellor of Mahatma Gandhi University, Kottayam, Kerala, India. Prof. Sabu Thomas is a highly committed teacher and a remarkably active researcher well-known nationally and internationally for his outstanding contributions in polymer science and nanotechnology. Prof. Thomas is an outstanding leader with sustained international acclaims for his work in Nanoscience, Polymer Science and Engineering, Polymer Nanocomposites, Elastomers, Polymer Blends, Interpenetrating Polymer Networks, Polymer Membranes, Green Composites and Nanocomposites, Nanomedicine and Green Nanotechnology. In collaboration with India’s premier tyre company, Apollo Tyres, Professor Thomas’s group invented new high performance barrier rubber nanocomposite membranes for inner tubes and inner liners for tyres.He has published over 1200 research articles in international refereed journals. and has also edited and written 165 books with an H-index of 122 and total citation of more than 72,000. He has received a large number of international and national awards and recognitions. Under the leadership of Prof. Thomas, Mahatma Gandhi University has been transformed into a top University in the country where excellent outcome based education is imparted to the students for their holistic development. Professor Thomas has received more than 30 national and international awards. 100 words Professor Sabu Thomas is currently Vice Chancellor of Mahatma Gandhi University, Kottayam, Kerala, india. Prof.Thomas is a highly committed teacher and a remarkably active researcher well-known nationally and internationally for his outstanding contributions in polymer science and nanotechnology. He has published over 1200 research articles in international refereed journals. and has also edited and written 165 books with an H-index of 122 and total citation of more than 72,000. He has received a large number of international and national awards and recognitions. Under the leadership of Prof. Thomas, Mahatma Gandhi University has been transformed into a top University in the country where excellent outcome-based education is imparted to the students for their holistic development.

Dr Javaid Butt is a specialist in the fields of Additive Manufacturing and Industry 4.0. He is working as an Associate Professor of Digital Manufacturing in the Faculty of Science & Engineering at Anglia Ruskin University. Dr Butt has won over £5.8 million in the past 5 years from different funding sources (including Innovate UK, Erasmus+, Interreg North Sea Region, KTP, KEEP+). Majority of his work is with industrial collaborators where he has successfully delivered projects of commercial value. His research work helped him in winning the Vice Chancellor’s Award in the Outstanding Research and Innovation Established Researcher category for exceptional contribution to Anglia Ruskin University’s ambitions in November 2021. Dr Butt has designed and developed several new manufacturing systems to various technology readiness levels to produce plastic, metal, and composite products using different automation principles and programming languages (e.g., C, C++, Python). His research in these areas has been published extensively in reputed international journalswith 37 publications since 2015.He has also provided consultancies to several national/international businesses and ledseveral knowledge exchange activities. Dr Butt’s current research focuses on the development of digital twins for additive manufacturing systems to enhance their performance using data-driven models and machine learning algorithms

Dr. Xing Fu received his Ph.D. degree in structural engineering from Dalian University of Technology (DUT), 2017, and worked as a postdoctoral fellow in DUT from 2017 to 2020, and the deputy director of the Structural Monitoring Institute since 2019. Currently, he is an associate professor in School of Civil Engineering, DUT. His research interests include multi-disaster resistance and intelligent evaluation of infrastructures. He presided more than 10 projects in these areas, includingthe General Program and Youth Science Fund of the National Natural Science Foundation of China, Special Grants and First-Class Grants of China Postdoctoral Science Fund, and Liaoning Doctoral Research Startup Fund. He has published over 40 peer-reviewed articles in international journals, 6 PCT patents, and 4 computer software copyrights. He was the awardee of the first prize of Liaoning Provincial Science and Technology Progress Award, the first prize of Electric Power Science and Technology Innovation, DUT XinghaiExcellentyouth program, and the Excellent Doctoral Dissertation of Dalian University of Technology. He is the guest editor of international journals, such as Journal of Aerospace Engineering-ASCE and Materials, and acted as a member of the academic committee of the 27th LSCE International Conference, the Chairman of the seminar in 17th ICCEE International Conference, and the member of ASCE and IALCE. He has rich experience in serving important projects, such as the five-hundred-meter aperture spherical radio telescope, the world's first 100000-ton deep-water semi-submersible production and storage platform "Deep Sea No. 1".

Will be updated soon.

Will be updated soon.

Len Gelman, PhD, Dr. of Sciences (Habilitation)joined HuddersfieldUniversity as a Professor, Chair in Signal Processing/Condition Monitoring and Director of Centre for Efficiency and Performance Engineering,in 2017 from Cranfield University, where he worked as Professor and Chair in Vibro-Acoustical Monitoring since 2002. Len developed novel condition monitoring technologies for aircraft engines, gearboxes, bearings, turbines and centrifugal compressors. Len published more than250 publications, 17 patents and is Co-Editor of 12Springer books. He is Fellow of:British Institute of NDT, International Association of Engineers and Institution of Diagnostic Engineers, Executive Director, International Society for Condition Monitoring, Editor-in-Chief, International Journal of Engineering Sciences (SCMR),Chair, annual International Condition Monitoring Conferences, Honorary Co-Chair, annual World Congresses of Engineering, Co-Chair, International Congress COMADEM 2019 and Chair, International Scientific Committee of Third World Congress, Condition Monitoring. Len is Editorial Board member of the International Journal “Electronics”, the International Journal “Sensors”, the International Journal “Energies”, the International Journal “Insight”,the International Journal of Prognostics and Health Management,the International Journal of Basic and Applied Sciences, the International Journal Vibration and Acoustics Research and the International Journal Signal, Image and Video Processing. He was Chair,First World Congress, Condition Monitoring, Chair, Second World Congress, Engineering Asset Management and Chair, International Committee of Second World Congress, Condition Monitoring. Len is Chair of International CM Groups of ICNDT and EFNDT and Member of ISO Technical Committee, Condition Monitoring. Len made 42 plenary keynotes at major international conferences and more than 100 invited lectures and seminars in the UK, USA, France, Italy, Denmark, Switzerland, Holland, India and Israel during period 1996-2019.He was Visiting Professor at ten Universities abroad. Len received two Rolls-Royce (UK) Awards for Innovation, COMADIT Prize (by British Institute of NDT) for significant contribution through research/development in condition monitoring, Oxford Academic Health Science Network Award, William Smith Prize by UK Institution of Mechanical Engineers and USA Navy Award. During his time at Cranfield, Len has developed technologies which have been field trialled in applications ranging from aircraft engines, gearboxes, bearings, steam turbines, composite materials and centrifugal compressors. He has managed as the Principal Investigator contributions to multiple EU funded programs, UK DTI programs (4 grants), multiple EPSRC grants, Royal Society grant, USA National Academy of Sciences grant, USA National Research Council grant, and multiple industrial contracts, including multiple contracts with Rolls-Royce (6 contracts), contracts with SKF, Shell, Scottish Southern Energy (two contracts), Caterpillar (USA, two contracts), London Underground (three contracts) and Cranfield Boeing Centre of Excellence (3 contracts). Before joining Cranfield University, Len was the Principal Investigator of USA International Science Foundation grant, USA Civilian Research and Development Foundation grants (two grants), USA MacArthur Foundation grant, Israel Lady Davis grant and Italian Landau Centro Volta grant. Len was •the Technical Manager of EU Framework FP7 project Monitur •the Technical Manager of EU Framework FP7 project Indgear •the Technical Manager of EU Framework FP7 project PileInspect •the Technical Manager of UK DTI project Sustain •the Coordinator of EPSRC project Len is reviewer of the following funding bodies: EPSRC, the Agency for Innovation by Science and Technology in Flanders,Belgium, German Research Foundation, Germany, Czech Science Foundation, Czech Republic, Research Grants Council, Hong Kong, China, Scottish Universities Physics Alliance, Scotland and National Research Foundation, South Africa.

Dr. Guanglei Wu received his PhD in robotics from Aalborg University, Denmark, 2013, and worked as an industrial Postdoc fellow in Aalborg University from 2014 to 2016. He was a visiting scholar in the Research Institute in Communications and Cybernetics of Nantes (IRCCyN, currently reorganized as Laboratory of Digital Sciences of Nantes-LS2N) in June-July 2012, in McGill University in Aug. 2015, and in Aarhus University in 2020. Currently, he is an associate professor in School of Mechanical Engineering, Dalian University of Technology (DUT). His research interests include robotic technology, conceptual design and performance evaluation of robots, robot dynamics and control, industrial robots and their applications. He has published one monography by Springer, 9 Chinese patents, and over 80 peer-reviewed articles in international journals and conferences. He was the awardee of AIS Expert of Year 2021, DUT Xinhai 1000 Youth Talent program (2018-2020), Best paper from IFToMM Asian MMS & CCMMS 2016, Academic Awards from Dept. Sci. Tech. Liaoning province, Longcheng Talent program by Changzhou Municipality. He has given over 10 keynote speeches for the international conferences. He is the referee for over 50 international journals and conferences in the fields of mechanisms and robots.

Dr. Karri Chiranjeevi is currently Post-doctoral researcher in the Computational Clinical Imaging Group (CCIG), Champalimaud Foundation Centre for the Unknown, Lisbon, Portugal. He received B.Tech. in 2003 from JNTU Hyderabad, MTech. in 2003 from JNTU Kaikinada and Ph.D from Veer Surendra Sai University of Technology, India. Both his MTech and Ph.D dissertations focused on computer vision and bio-medical image processing. He has teaching experience of more than 18 years in the areas of computer vision, soft computing, machine learning, deep learning and bio-medical image processing. He also did Postdoc at in University of Beira Interior, Portugal from 2019 to 2021. Under his guidance, 6 Ph.D scholars awarded and 5 scholars are working for submission of thesis. He has presented many research papers related to bio-medical image processing with soft computing techniques at international and national levels. He is speaker of several conferences and visiting faculty of symbiosis university, India. He is editor of international journals, book chapters and acted as conference chair at international and national levels. His research interests include machine learning/deep learning for rectal and breast cancer detection, security and computer vision. He has an experience on amazon cloud services. He acted as mentor for students from New York, USA. He has research collaboration Taif University, Saudi Arabia. He attended summer school at Oxford University, London, United Kingdom (UK). He delivered several webinar talks and given several guest lectures.

Jiawen Hu received the B.S. degree in mechanical engineering from Shanghai Jiao Tong University, Shanghai, China, in 2009, the M.S. degree in mechanical engineering from the Chinese Academy of Sciences, Beijing, China, in 2012, and the Ph.D. degree in industrial engineering from Shanghai Jiao Tong University, in 2017. He is currently an Associate Professor with the School of Aeronautics and Astronautics, University of Electronic Science and Technology of China, Chengdu, China. His current research interests include maintenance optimization and degradation modeling.

Rami Ahmad El-Nabulsi holds a PhD in Particle Physics, Mathematical Physics and Modeling from Provence University (currently Aix-Marseille University), France and a diploma of advanced studies in Plasma Physics and Radiation Astrophysics from the same institution. He worked with different worldwide research departments in UK, South Korea, China, Greece, Thailand, India, etc. and he is currently affiliated to Chiang Mai University, Thailand. He is the author of more than 310 peer-reviewed papers in peer-refereed reputed journals and a reviewer for more than 120 scientific journals. His research ranges from applied mathematics to theoretical physics including nonlinear dynamical systems, space and astrophysics, general relativity and geometrical and algebraic physics, physics and chemistry of solids, plasma MHD, neutronics and nuclear reactors, superconductivity, and magnetic materials among others.

Hijaz Ahmad is a researcher in the field of Applied Mathematics at International Telematic University Uninettuno, Corso Vittorio Emanuele II, Roma, Italy. He is Head of the Mathematics in Applied Sciences and Engineering Research Group, Scientific Research Center, Al-Ayen University, Nasiriyah, Iraq, and Associate Member of the Section of Mathematics, International Telematic University Uninettuno, Corso Vittorio Emanuele II, Roma, Italy. The scope of his research is quite broad, covering Numerical Analysis, Fractional Calculus, Mathematical Inequalities, Quantum Calculus, and Mathematical Analysis. He has published over 300 research articles in international journals and a total number of citations of over 3300 (Google Scholar H-Index = 30). He has collaborated with over 50 international countries and more than 700 researchers. He has served as a reviewer for more than 100 international journals and an editor for at least 30 journals.

Prof. Dr. Yarub Al-Douri is from American University of Iraq, Sulaimani. Al-Douri has initiated Nanotechnology Engineering MSc Program and Nano Computing Laboratory. He has received numerous accolades including winner of IAAM Scientist Award by International Association of Advanced Materials, Sweden 2022, World’s Top 2% Scientists by Stanford University, USA 2022, 2021 & 2020, OeAD Award, Austria 2020, JSPS Award 2019, AUA Award 2019, IFIA 2019, TWAS-UNESCO Associateship (Twice) Award 2015 & 2012, the total is 70 awards. Al-Douri is Associate Editor of Nano-Micro Letters (Q1), Editor-in-Chief of Experimental and Theoretical NANOTECHNOLOGY, Editor-in-Chief of World Journal of Nano Science and Engineering,

Dr. Mahmoud Fathy Mubarak Head of underground water treatment plant project in Upper Egypt - STDF Supervisor of water desalination processing group- EPRI-Egypt B.Sc. (2009), M.Sc. (2014) and Ph.D. (2018).Researcher of applied physical chemistry- Egyptian petroleum research insatiate, Egypt.Dr. of applied petrochemicals - faculty of science - El-Mansoura University, Egypt. PI, CO-PI and members of, 7 STDF projects in water treatment, desalination, wastewater management, ZLD, and Modeling and simulation of the processes.Published More Than 80 Papers in International Journals in fields of nanotechnology and desalination processing and modeling Published 5 books/ chapters in the field of water treatment technology, the challenges of the century in water resources, and in the field of quantum dots and their various environmental uses. Recipient of Federation of Arab scientific research council’sawarded in water invitation filed (2020).Have patent with no.1085/2015 – in nanotechnology- STDF – Egypt. Member of 10 international and local societies in the field of chemical engineering. Member of the Board of Directors of the core lab Center - Water compatibility Laboratory

Eyob Messele Sefene (E.M. Sefene) is a Ph.D. candidate and independent researcher in Mechanical Engineering at the National Taiwan University of Science and Technology in Taiwan. He received his Bachelor's and Master's degrees from Bahir Dar Institute of Technology and pursued his Ph.D. in Mechanical engineering. He has been a senior lecturer and researcher on advanced welding and additive manufacturing for more than 6 years. He has published more than 16 research papers in international journals and conferences and has been a reviewer in three mechanical engineering journals. His main research interest includes Intelligent and Green Manufacturing systems.

Dr. Stanislaw Nader, Eng. Warsaw Management University in Warsaw. Doctor of Philosophy in the field Engineering and Technology in the scientific discipline; Civil Engineering and Transport at the Faculty of Transport Engineering, Poznan University of Technology, Poland. Doctoral studies at the Warsaw University of Technology, and my professional degree is Master of Engineering in the field of transport with a specialization in logistics and transport technology. Current work: Assistant Professor and Head of Department of Production Engineering and Logistics at the Faculty of Management and Technical Sciences at the Warsaw Management University in Warsaw. I have worked at the Industrial Automotive Institute, Warsaw at the Department of Acoustics and Electronics. I have also cooperated with the Warsaw School of Ecology and Management and the Warsaw School of Banking. I am an experienced academic teacher and supervisor of many master's and engineering theses. I have had more than a dozen publications in the area of intermodal transport based on two innovative patents in regard to Railway Transportation wagons, with side loading and unloading of trucks and heavy equipment, of which he is a co-author. I am also experienced in the field of using BCI and EEG to process and analyse signals of the driver’s brain activity during VR simulation. I am actively involved in the preparation of research projects in Poland for the construction of an intermodal transport system for the transportation of TIRs in order to implement a coherent logistics system, the core of which are the above-mentioned patents. Their application will contribute to a sustainable development in transportation for the future. The new solutions include significant improvements in cargo transportation efficiency compared to currently existing methods. These include; measurable environmental and economic benefits. Greatly improved living conditions for people in the zones influenced by major road transportation, such as; a reduction of exhaust emissions, reduction of fuel consumption, reduction of vibrations and noise affecting the surroundings, reduction of harmful abrasion from car tires, use of autonomous rail and road vehicles. Hobbies: cycling, automotive, sea diving, strategy games, classic skiing, classic guitar.

Prof. Milica Slijepčević works as an Associate Professor at the Management Department of Metropolitan University, Serbia. Prof. Slijepčević is the author of more than thirty (30) published research papers, four book chapters and three books on various marketing topics. The topic of the last research conducted with colleagues is about neuromarketing. The result of this research was published in journals of the SCI list and in a monography titled Neuromarketing, Challenges and Trends. Prof. Slijepčević is interested in consumer behavior in the modern market. She has been granted a few awards and received the highest recognition in the year 2021 for her contribution to the development of the University.

Haifeng Ma received the Ph.D. degree in Mechatronics from Shanghai Jiao Tong University, China, in 2017. He was a postdoctoral fellow in The Hong Kong Polytechnic University during 2018-2020, Kowloon, Hong Kong, China. He is currently a Full Professor of the Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan, China. His research interests include vibration control, machine vision, and mechanical signal processing. He has published 35 journal papers, including the papers in IEEE T IndInform、IEEE T IndElectron、Int J Mach Tools Manuf、IEEE-ASME T Mech、J Sound Vib、MechSyst Signal Pr.He Was funded by the National Natural Science Foundation of China, and won the "Hong Kong Scholar". He serves as reviewers for several journals, including IEEE-ASME T Mech, IEEE T Ind Inform, Automatica, MechSyst Signal Pr.

Dr. Raja Kannusamy is the Program Leader- Business at COLAB (part of Australian Institute of Professional Counsellors) UP Education. In this role Raja is responsible for the teaching and engagement of students in a suite of innovative online business programs and provides academic leadership and expert advice to ensure College of Leadership and Business students are engaged and well supported. Raja manages a dynamic and high-performing academic team that provides a positive learning experience, with high quality supporting resources and services. Raja holds a PhD in Business Operations Management, Master’s in Industrial Engineering & Management, a Graduate Certificate in Education, and a Graduate Certificatein Educational Studies (Digital Learning), from University of South Australia. Dr. Raja has over 22 years of experience in teaching Postgraduate and Undergraduate students in Australian, UK and Indian Universities.Dedicated to preparing learners and industry to evolve with the technological landscape, Dr Raja was presented with ‘The Brian Gibson Best Academic Paper Award’ by the Small Enterprise Association of Australia and New Zealand (SEAANZ) for his investigation into the future of work for small and medium-sized enterprises. At COLAB, Dr Raja is leading and continuously developing the high education curriculum for students to seamlessly transition into the professional world with a breadth and depth of future-proofed skills.

ESSAID MERYAM is an assistant professor in the Department of Robotics Engineering at Keimyung University, South Korea. She received a Ph.D. degree from the Department of Computer Engineering, Keimyung University, in 2020. She received M.S. and B.S. degrees in Computer Science from FEDE, SWISS, in 2012 and 2014, respectively. Her research interests include network management, network security, AI, and blockchain technology.

Mahdieh Ebrahimi is a Daphne Jackson Research Fellow in the Metal forming and materials modelling group, Department of Mechanical Engineering, Imperial College London. She carries out fundamental research in micromechanics of crystalline materials, their microstructure interactions, and their correlation to failure of materials and their mechanical properties. She is interested in Material Genome Engineering and Virtual Manufacturing to design new advanced materials with predictable properties. She completed her PhD. in the Theory and simulation of materials at Physics Department, Imperial College London, in conjugation with Element Six Ltd; the world’s leading manufacturer of synthetic diamonds for hard abrasive materials. She obtained her bachelor's degree in solid-state physics and her master's degree in gravitational and particle physics from Tehran University.

Dr. Mohammad Hassan Hadizadeh is currently working as a researcher at Shandong University. He received his Ph.D. from the University of Science and Technology of China. His research fields include using quantum chemical and molecular dynamic simulation studies to investigate nanostructures, environmental science, and corrosion science.

Somdatta Goswami is a Postdoctoral Research Associate in the Division of Applied Mathematics, at Brown University, where she is advised by Prof. George Karniadakis. Her work is primarily concerned with the development of effective machine learning methods for high-dimensional physics-based systems in the fields of computational mechanics and biomechanics. She works particularly to develop learning machines that use the underlying physical principles and/or governing equations to identify patterns in the high-dimensional data produced by experimental data. Under the guidance of Prof. Timon Rabczuk, she graduated with a Ph.D. in civil engineering from Bauhaus University in Germany in 2020. She earned her undergraduate degree in civil engineering from Birla Institute of Technology in Ranchi, India, and her master's degree in structural engineering from the Indian Institute of Engineering Sciences and Technology in Shibpur.

Razieh has been working for London Bridge Associates, which advices on tunnel construction and tunnel safety issues, since 2020. She has a Doctor of Philosophy in mechanical engineering with a specialization in fire safety science at the National University of Malaysia (UKM) and was awarded for “Graduate on Time". Razieh has six years of experience in research activities that have focused on experimental methods and numerical simulation related to fire science within the fields of fire safety, fire dynamics, and tunnel fire. In particular, her research focuses on the study of the effect of the fire source location, vehicle blockages, humidity, and wall roughness on smoke movement and critical velocity in road tunnels. Furthermore, she has particular experience in numerical simulation and software applied in Fluid Dynamics, fire and safety, and evacuation. Since joining LBA, Razieh has demonstrated her commitment to increasing her knowledge of the UK and European fire industries. She has involved in SilverTown, Gibraltar Airport, and Piccadilly Underpass tunnel projects. She oversees the production of systems, procedures, and strategies for the safe operation of the tunnels listed above and promotes, facilitates, monitors, and advises on all aspects of the road tunnel operational safety issues. She also works on a Quantitative Risk Analysis (QRA) model for road tunnels, which is the first QRA model for UK road tunnels. She is an associate member of PIARC WG2 dealing with fire safety.

Ahmed does research in studying, investigation and conservation of a wide variety of ancient Egyptian decorated wooden artifacts including Coffins, Khufu Boats and Tutankhamun collection using several scientific diagnoses such as multispectral imaging, microscopy, wood identification and single-spot spectroscopic techniques such as XRF and Vis-RS, as well as he is currently working on the installation of a wide variety of 5600 objects of Tutankhamun in TUT Gallary at GEM (Phase 1).

I have received a Ph.D. degree in Applied Mathematics from Zhejiang University, China. I am currently affiliated with the Mechanical Engineering department at Beijing University of Technology, where I teach various fluid mechanics and engineering mathematics courses and conduct research in this area. My administrative and academic career spans more than 15 years, during which I worked at institutions with high reputations both locally and internationally. My research includes the areas of Fluid dynamics, Mechanical Engineering, MHD flows, nanofluids, Theoretical Physics, Differential Equations, and Mathematical modeling of real-world problems. In addition, I am working as an academic editor and potential reviewer for several prestigious worldwide academic journals.

Mustafa M.A. Seedahmed currently is a PhD student of Electrical and computer engineering at King Abdulaziz University, Jeddah, KSA. He received his BSc degree from Sudan University of Science and Technology, Khartoum, Sudan in 2015. He obtained his MEng degree from North China Electric Power University, Beijing, China in 2019. His research interest includes renewable energy resources optimization, energy management and control techniques and power system stability and control.

Ali Roshanianfard is a professional researcher and engineer in the field of Autonomous Agricultural Vehicle. He has many academic paper, patents, project, and collaborative jobs in the field agricultural robotic systems, mechatronics and intelligent systems in agricultural machinery, information technology, sensors, and control systems, cultivation and processing systems, and artificial intelligence in agriculture. He got his Ph.D. from the laboratory of vehicle robotics (Vebots), Hokkaido University, Japan, and he is working at the University of Mohaghegh Ardabili (UMA), Iran, as Assistant professor in Biosystem engineering. He collaborating in part-time remote mode with different industries all over the world.

Dr. Ravinder Kumar is working as a Professor in Mechanical Engineering Department, Lovely Professional University, India. He completed his Ph.D. in Mechanical Engineering on Thermal performance analysis of Coal based Power Plant in India. He published a total of 90+ research papers in various renowned SCI indexed journals like (Applied Energy, Energy, Fuel, Renewable Energy, Journal of cleaner production etc.), 04 conference papers, 01 book, 04 Book chapters. He has more than 3000 citations, 26 h-index and 67 i10-index. His broad area of research are Solar energy, Renewable energy resources, Design of Thermal/Energy Systems, Energy and exergy analysis of devices (applicable in thermal industries), Waste management, Modeling and simulation, CO2 capture. He is also listed as World's Top 2% Scientist for the years 2020, 2021, 2022 by Stanford University.

Professor Bright is the Dean and Head of the School of Engineering. He graduated with a BSc (Mechanical Engineering), MSc (Engineering) and PhD (Engineering) degree at the Ex-University of Natal in Mechatronics, Robotics and Advanced Manufacturing Systems. He is a Professor of Mechatronics, Robotics and Advanced Manufacturing Systems since 2002 and a holder of the James Fulton Chair in Mechanical Engineering. He graduated with an MBA degree at UKZN in 2011 and lectures courses in Mechatronics, Robotics and Advanced Manufacturing Systems. Prof Bright is the leader and supervisor of the Mechatronics and Robotics research Group, (MR2G) since 1995.

Mr. Zeeshan Ali has defended the final review of PhD in Engineering (Applied Mathematics) at the School of Engineering, Monash University Malaysia, in September 2022. His research fields include fractional calculus, Infectious disease modeling and the numerical analysis of fluid dynamic problems. He has published 20 research articles to date in different reputed journals and presented his research at various international conferences in the last two years, which were held in Turkey, Portugal, and Greece. Besides, he was one of the organizers of the first postgraduate conference 2021 at Monash University Australia.

Łukasz Doliński received an MSc in Mechanics and Mechanical Engineering, in the field of Robotics, from the Gdańsk University of Technology, Faculty of Mechanical Engineering, Poland, in 2004, and a PhD degree in Technical Sciences, discipline: Automation and Robotics, specialization: Digital signal processing, Gdańsk University of Technology, Faculty of Electrical Engineering, Poland, in 2014. He is currently an Assistant Professor at the Department of Biomechatronics, Faculty of Electrical Engineering, Gdańsk University of Technology, Poland. His scientific interests include modelling and analysing physical phenomena, especially by the application of the finite element methods and advanced signal processing methods, including wavelet analysis, machine learning or genetic algorithms. He has mainly used these methods to simulate and analyse signals representing rapidly changing physical parameters, such as mechanical vibrations or waves as well as biosignals. His current research focus is on methods for designing and optimising mechanical structures to achieve predetermined physical properties.